1、 The improvement of environmental awareness and the challenge of carbon fiber cloth productionWith the increasingly severe global climate change, governments and various sectors of society around the world are paying increasing attention to environmental protection. In this context, the carbon fib...

1. The concept of fiberglass mat densityThe density of Fiberglass Tissue Mat for Roofing refers to the mass of glass fiber contained in a unit area, usually expressed in grams per square meter (g/m²). The density directly affects the mechanical properties, compressive strength, water absorption, the...

1、 Selection and Quality Control of Raw MaterialsThe production of carbon fiber cloth begins with the selection of raw materials. High quality carbon fiber is the foundation for manufacturing high-quality carbon fiber cloth. High quality carbon fiber should have high strength, high modulus, good for...

I. Environmentally friendly product design1. Raw material selectionRenewable and degradable materials: The preferred raw materials of Pipe Tissue should be renewable or degradable fiber materials, such as bamboo fiber, hemp fiber, organic cotton, etc. These materials are not only derived from nature...

1. Choose the right glass fiber raw materialThe quality of Fiberglass Tissue Mat is the basis for determining the strength of non-woven fabrics. Using high-quality glass fiber raw materials can provide products with higher tensile strength and tensile strength. Common types of glass fibers include E...

1. Renewable raw materials and resource conservationThe main raw materials of Fiberglass Surfacing Veil include six ores, including pyrophyllite, quartz sand, limestone, dolomite, colemanite and boraxite. Most of these raw materials are natural inorganic minerals, and their mining and processing hav...

1. Type and form of fiberFiberglass Surfacing Veil:Fiberglass Surfacing Veil is a material made of very fine glass fibers. Its fiber diameter is usually 5 to 10 microns, which is much smaller than the diameter of ordinary glass fibers. These fine glass fibers are processed into a uniform thin layer ...

Application of new fiber materialsThe application of new fiber materials in Surfacing Veil brings unprecedented performance improvements and diversified options to the product. High performance fibers:High-performance fibers, such as carbon fiber, aramid fiber, glass fiber and ultra-high molecular w...

1. Enhance the structural strength of mechanical componentsFiberglass Surfacing Veil can be used as a reinforcing material and is widely used in the manufacturing of various mechanical parts. By compounding it with matrix materials such as resin, the tensile strength, bending strength and compressiv...

1. Raw material preparationThe main raw materials of Black Fiberglass Tissue Facing are glass fiber and resin. Glass fiber is usually E-glass or C-glass, which has the characteristics of high strength, high modulus, corrosion resistance, etc. Resin is used as a binder to bond the glass fibers togeth...

Reduce energy consumptionUse energy-efficient equipment:Fiberglass Wall Covering Mat Suppliers introduces energy-efficient motors, compressors and lighting equipment in the production line, which have lower energy consumption and higher efficiency than traditional equipment.By using advanced automat...

1. High Strength CharacteristicsThe high strength of Fiberglass Tissue Mat for Roofing mainly comes from its unique fiber structure and material composition.Fiber reinforcement:Fiberglass Tissue Mat for Roofing is interwoven with countless tiny glass fibers, which have extremely high strength and ri...